Bell instructions

From ChapmanCentral

Jump to: navigation, search

These are the instructions from a Bell brand cycle helmet.

See how modest these claims are by comparison with those made on their behalf by handwringers and zealots. The manufacturers are subject to legal controls, while the handwringers are not (I complained to ASA about one grossly misleading helmet ad and was told that, essentially, they were allowed to lie because it was in a good cause).

Contents

Limited impact protection

Helmets cannot always protect against injury. Even a very low speed impact can result in serious injury or death. Any helmet subjected to a sever impact should be discarded and destroyed, even though damage may not be outwardly visible. Since this helmet is made of polystyrene foam, there is a chance it may be penetrated by sharp objects.

Helmets can't protect what they don't cover

This helmet will not protect the neck or any areas of the head that it does not cover. It cannot guard against spinal or other bodily injuries that may result from an accident.

Safety

This helmet has a limited life span in use and should be replaced when it shows obvious signs of wear.

  • Do not modify or remove any original component for the purpose of attaching accessories, other than as recommended by Bell Sports.
  • This helmet should not be used by children when climbing or doing other activities when there is a risk of hanging if the child gets trapped with the helmet.
  • Please exercise care and good judgement whenever you ride. Comply with all traffic regulations and do your part to avoid accidents of any kind. Many accidents happen close to home.
  • Watch carefully for drivers turning in front of you. Drivers often report that they never saw the bicycle or the rider.
  • Wear brightly colored clothes.
  • Don't ride at night without proper lighting and reflectors. Watch for parked cars. Doors often open without warning.
  • Pretend you're invisible. Don;t assume that automobile drivers can see you.

Fitting the helmet to your head

In order for your Bell helmet to work correctly, it must fit and be worn correctly. Follow these five simple steps to learn how to properly fit and wear your helmet. You will need a mirror.

[there follows a detailed description of how to wear a helmet, which I will scan because it has pictures]

Personal tools